The EOS series combines all functions in a single, easy-to-use, robust barcode printer
product details
Overview The SQUIX 4 MT are the further development of A4+T. The professional SQUIX label printers fit with a wide range of industrial applications. They have been developed with focus on easy and convenient operation and high reliability. The print mechanics and the chassis are made of high-quality materials and perfectly match in terms of shape and function. A large number of peripherals and software enable customer-specific solutions. Whether they are operated in stand-alone mode, in a PC application or within a network - the rugged SQUIX printers are always up to the mark. The high-speed processor ensures fast job processing and immediately provides the required label. The textile printer At high heat energy the ribbon can stick with the textile tape. A roller reliably separates the material from the ribbon. It is also possible to print on labels or continuous materials that are wound on rolls or reels. As regards the label width, no adjustment of the plungers is needed. Width-adapted print rollers are provided for slim materials. Functions Differences compared to a left-aligned material guide: 1 Ribbon holder 2 Roll holder 3 Plungers 4 Antistatic brush 5 Separator 6 Material guide Slim print rollers Coating: synthetic rubber Technical data Label printers SQUIX MT series
1.5 Label printer
SQUIX 4.3 MT
SQUIX 4 MT
Printable resolution dpi
300
300
600
Print speed up to mm/s
250
300
150
Print width up to mm
108.4
105.7
105.7
See also:
SQUIX 4 M
especially very small labels or slim continuous materials
SQUIX 2, SQUIX 4, SQUIX 6
flexible printers for industrial applications in serveral widths
Easy insertion of the ribbons is enabled with the three-part tightening axles. A preprinted ruler simplifies the adjustment.
When setting the margin stop, the material roll is automatically centered. If rolls with 100 mm core diameter are processed, an adapter is recommended.
Both plungers are fixed for all material widths. No print head settings or adjustments are necessary.
Particularly with plastic materials the electrostatic charge is discharged after printing.
At high heat energy the ribbon can stick with the textile tape. A roller reliably separates the material from the ribbon.
The material guide just in front of the print roller provides accurate imprint. The material width is adjusted with a spindle.
Label printers SQUIX 4 MT | cab
To achieve accurate imprint with slim materials and ribbons slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed.
1.5
Label printer
SQUIX 4.3 MT
SQUIX 4 MT
Material feed
centered
Printing method: Thermal transfer
&
&
&
Printing method: Thermal direct
&
~
-
Printable resolution dpi
300
300
600
Print speed up to mm/s
250
300
150
Print width up to mm
108.4
105.7
105.7
Print start Distance to locating edge mm
centered
Material
Roll, fanfold, reel: Paper, cardboard, PET, PE, PP, PI, PVC, PU, acrylate, Tyvec
&
Roll, fanfold, reel: Smart Labels
~
Roll, fanfold, reel: Ready-for-use shrink tubes
~
Roll, fanfold, reel: Pressed continuous shrink tubes
~
Roll, fanfold, reel: Textile tapes
&
Labels1) Width mm
4 - 110
Labels Height without label backfeed2) from mm
4
Labels Height with label backfeed2) from mm
6
Labels Maximum height mm
2,000
Labels Thickness mm
0.03 - 0.60
Carrier material Width mm
9 - 114
Carrier material Thickness mm
0.03 - 0.16
Continuous material Width mm
9 - 114
Continuous material Thickness mm
0.05 - 0.50
Continuous material Weight (cardboard) up to g/m2
300
Shrink tubes Width ready-for-use up to mm
114
Shrink tubes Width continuous mm
4 - 85
Shrink tubes Thickness up to mm
1.1
Roll, reel: Outside diameter with core diameter
205 / 38.1 - 76
180 / 100
Winding
outside or inside
Ribbon3)
Ink side
outside or inside
Roll diameter up to mm
80
Core diameter mm
25.4
Variable length up to m
450
Width mm
25-114
Printer sizes and weight
Width x Height x Depth mm
252 x 288 x 460
Weight kg
10
Label sensor with position indication
Gap sensor for
labels, punch marks or print marks in transparent materials and end of material
Reflective sensor from below or top for
print marks in not transparent materials and end of material
Distance sensor from center to locating edge centered mm
0-55
Height of material gap up to mm
2
Electronics
Processor 32 bit clock rate
800
Main storage (RAM) MB
256
Data storage (IFFS) MB
50
Slot for SD memory card (SDHC, SDXC) up to GB
512
Battery for time and date, real-time clock
#
Data storage when power is off (e.g. serial numbers)
#
USB WLAN stick 2.4 GHz 802.11b/g/n
# (included as an extra item in the scope of delivery)
Interfaces
RS232C 1,200 to 230,400 baud/8 bit
#
USB 2.0 Hi-speed device to connect a PC
#
Ethernet 10/100 BASE-T
LPD, IPv4, RawIP printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, NTP, Zeroconf, SOAP web service, VNC
1 x USB host at the operation panel for
1 x USB host at the operation panel forService Key or USB memory stick
USB WLAN stick 2.4 GHz 802.11b/g/n
2 x USB host on the back side for
Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adapter, USB WLAN stick
WLAN 802.11b/g/n, hotspot or infrastructure mode GHz
2.4 # / 5 *
Periphery connection USB host, 24 VDC
#
Digital I/O with 8 inputs and outputs
*
Operating data
Power supply
100 - 240 VAC ~ 50/60 Hz, PFC
Power consumption
Standby <10 W / typical 150 W / maximum 300 W
Temperature / humidity: Operation
+5 - 40°C / 10 - 85% not condensing
Temperature / humidity: Storage
0 - 60°C / 20 - 85% not condensing
Temperature / humidity: Transport
–25 - 60°C / 20 - 85% not condensing
Approvals
CE, FCC class A, CB, CCC, cUL
