The main technical parameters and specifications are applicable to the packaging film width: the same width as the packaging machine applicable to the packaging film width.

Applicable volume specification: outside diameter φ 360mm,

inside diameter φ 76mm,

Base paper width 20 ~ 130mm

marking speed: 0 ~ 25m/min

marking accuracy: ± 1mm(excluding product and label own error)

Applicable power supply: AC 220V ± 5V50HZ

Machine total power: 400W

Machine weight: approximately 100kg

Appearance size: 1400 mm x width 800mm X height

The requirements of the machine for the label quality technology are as follows:

1) The label must be a roll mark, that is, a roll. (The direction of the volume must be the same as the direction of the label at the time of labeling. Please determine with the label manufacturer in advance.

 2) The outer diameter of the roll is φ 360mm or less, and the inner diameter of the roll is φ 76mm

 3) Label spacing: 3 ~ 5mm(avoid material waste, recommend 3mm, and ensure equal spacing).

4) The distance between the upper and lower sides of the label and the bottom paper: 2mm.

5) The label bottom paper needs to use 62 grams of white Glaxin bottom paper. The paper is dense and has good internal strength and light permeability. It is not easy to be torn. The die-cutting performance is excellent and it can not damage the paper.

6) Base paper basic weight: 62g / M2 ± 5 % / M2; Thickness: 55 μm ± 5 % 7) tensile force: longitudinal(machine direction) 16kg/25mm, transverse 7kg/25mm. 8) Tear resistance: longitudinal(machine direction) 25 g/Zhang, transverse 31 g/Zhang. 9) Transparency: 52 %